Raymarine forum
[CA] [CA11] Axiom 9 Pro manually entering GPS coordinates - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: General Discussions (/forumdisplay.php?fid=2)
+--- Thread: [CA] [CA11] Axiom 9 Pro manually entering GPS coordinates (/showthread.php?tid=6600)



[CA11] Axiom 9 Pro manually entering GPS coordinates - lwilson - 09-13-18 07:20 AM

Hello,
I have looked in the manual for the Axiom 9 pro but cannot seem to find any information on this.
Is there a way to manually enter GPS coordinates ( lat and long) on this unit?
Would be nice to do if possible when trying to see where someone that need assistance is to your position.

Thank you,
Lance.


RE: [CA11] Axiom 9 Pro manually entering GPS coordinates - Chuck - Raymarine - Moderator - 09-13-18 08:50 AM

Welcome to the Raymarine Forum Lance,

This subject is addressed in detail within Chapter 7.1: Waypoints of the LightHouse 3.6 Advanced Operation Instructions. In short the command sequence Menu->New->New waypoint at lat/long is used to create a waypoint at the coordinates entered by the user.