Haxy ST60 display - Printable Version +- Raymarine forum (http://forum.raymarine.com) +-- Forum: Raymarine Forums (/forumdisplay.php?fid=1) +--- Forum: Instruments (/forumdisplay.php?fid=117) +--- Thread: Haxy ST60 display (/showthread.php?tid=6608) |
Haxy ST60 display - Lew Springer - 09-14-18 10:03 AM I have two ST60 GRAPHIC displays that have a hazy cast over the center of the display. I disassembled the display to attempt to clean the back of the screen but it was clear. What is the cause of the haze? Is it correctable? A photo is attached. RE: Haxy ST60 display - Chuck - Raymarine - Moderator - 09-14-18 10:26 AM Welcome back to the Raymarine Forum Lew, Unfortunately, the pictured symptom is that of a LCD which is failing. Unfortunately, Raymarine's Product Repair Center can no longer service ST60/ST60+ instruments. You may want to consider replacing this instrument with an i70S Multifunction Instrument Display (MFID). The i70/i70S MFDs may either be installed to support SeaTalk communications or to support SeaTalkng / NMEA 2000 communications. RE: Haxy ST60 display - Lew Springer - 09-14-18 09:26 PM I'm sorry the news is not better, but thanks for the reply. RE: Haxy ST60 display - Chuck - Raymarine - Moderator - 09-17-18 11:39 AM You're welcome. |