+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Product Selection Assistance (/forumdisplay.php?fid=124)
+--- Thread: [CA] [CA11] Transducer Clarification (/showthread.php?tid=6685)
[CA11] Transducer Clarification - Tillysstar - 09-27-18 09:54 AM
I have purchased an i70 and will be replacing both separate speed and depth transducers.
I understand I will need the iTC-5 unit to work with i70, and am looking at the ST60/290 speed transducer and either the P19 or CPT-S as a depth.
Plan being when I upgrade the existing plotter I already have a transducer that will provide sonar readings to the plotter if going down the CPT-S route.
Would this set up work with just the i70 in the meantime?
RE: [CA11] Transducer Clarification - Chuck - Raymarine - Moderator - 09-27-18 10:26 AM
Welcome to the Raymarine Forum Tillysstar,
CPT-S, DownVision, RealVision, and CHIRP transducers cannot be interfaced directly to depth instruments, an iTC-5, or to a depth instrument pod. It is however possible for an instrument which is capable of reporting depth data to be interfaced to a MFD which has in turn been interfaced to a CPT-S, DownVision, RealVision, and CHIRP transducer. When so interfaced, the instrument may report depth determined by the MFD.
RE: [CA11] Transducer Clarification - Tillysstar - 09-27-18 12:18 PM
Thanks for the info Chuck,
I'll stick with the standard depth & speed transducers, with iTC-5 to convert signal for the i70
RE: [CA11] Transducer Clarification - Chuck - Raymarine - Moderator - 09-27-18 01:02 PM
You're welcome.