Raymarine forum
[CA] [CA11] axiom 9 transducer - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] [CA11] axiom 9 transducer (/showthread.php?tid=6868)



[CA11] axiom 9 transducer - garybly - 11-01-18 07:47 AM

I have an Axiom 9, Do I need the dual transducer pack on my twin screw inboard sea ray, or can I use the rv-200 single transducer, 21 degree hull angle?


RE: [CA11] axiom 9 transducer - Chuck - Raymarine - Moderator - 11-01-18 09:35 AM

Welcome to the Raymarine Forum garybly,

Transom mounted transducers are not recommended for vessel's having inboard propulsion. I suspect that you will fined that your hull does not feature a flat spot on the keel to accommodate installation of a RV-200. In this case, it would be recommended that a thru-hull RV transducer pair appropriate for the deadrise of the installation area be installed (i.e. RV-220 or RV320).


RE: [CA11] axiom 9 transducer - garybly - 11-01-18 10:17 AM

I'm sorry I meant the rv-220 through hull, can I install just one transducer? I think the rv-320 comes in a kit of 2? I only want to install one if possible?


RE: [CA11] axiom 9 transducer - Chuck - Raymarine - Moderator - 11-01-18 11:58 AM

garybly,

Tilted element thru-hull RV transducers are not designed to be installed singly. Both right and left elements of these RV transducers must be installed. The T70319 RV-220 and T70321 RV-320 20 Degree Through Hull Transducer Packs each feature a pair of transducer and a Y-Cable.


RE: [CA11] axiom 9 transducer - garybly - 11-02-18 08:54 PM

Thanks for the info! I thought that was the case, wanted to make sure...


RE: [CA11] axiom 9 transducer - Chuck - Raymarine - Moderator - 11-05-18 09:08 AM

You're welcome.