Raymarine forum
[LW] [LW11] iTC-5 and signet marine sensors - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Networking / System Integration (/forumdisplay.php?fid=21)
+--- Thread: [LW] [LW11] iTC-5 and signet marine sensors (/showthread.php?tid=7149)



[LW11] iTC-5 and signet marine sensors - wprothero - 01-03-19 07:01 PM

I have been refitting an 1976 Ericson 29. It has both a Signet Marine speed sensor and depth sensor as original equipment. I have already installed a Raymarine iTC-5 Instrument Transducer Converter for the Raymarine wind instruments and I was wondering if it is possible to connect the Signet Marine speed and depth sensors. Is this possible without damaging the iTC-5 unit? Thanks for the help.


RE: [LW11] iTC-5 and signet marine sensors - Louise - Raymarine - Moderator - 01-08-19 07:32 AM

Dear wprothero,

Thank you for your query.

The iTC-5 will not support the signet speed and depth transducers, it will only support our analogue transducers. Do the Signet instruments output NMEA0183 data? I have looked on the website and cannot find this information.
Depending on the sentences output by the instruments, there could be a way of integrating them on your system. What other products do you have installed on your vessel?

Many Thanks
Louise