Raymarine forum
Ray 50 - Easier access to scan mode? - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Product and Feature Suggestions (/forumdisplay.php?fid=128)
+--- Thread: Ray 50 - Easier access to scan mode? (/showthread.php?tid=728)



Ray 50 - Easier access to scan mode? - Ed Y - 05-03-16 01:22 AM

I like to use the scan function on my vhf to monitor my regular channels + 16/9. With the Ray50, it seems like the only way to do this is to scroll to scan mode, then scroll to the appropriate method of scanning.

If I respond to a someone sending, say on channel 68, I need to go back to the menu options to get back to scan mode. Is there an easier way to accomplish this?


RE: Ray 50 - Easier access to scan mode? - Chuck - Raymarine - Moderator - 05-04-16 08:44 AM

Welcome to the Raymarien Forum Ed,

Unfortunately, the Ray50/60/70 VHF Radios do not currently support a "resume scan" feature, necessitating that the scan be set up again following communications. A feature request will be logged to consider this feature for inclusion within a future software update to Raymarine's current line of VHF radios as well as for inclusion within any future VHF radio designs.

Please click here more information concerning product and feature suggestions.