+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Product Selection Assistance (/forumdisplay.php?fid=124)
+--- Thread: Upgrading system (/showthread.php?tid=736)
RE: Upgrading system - Chuck - Raymarine - Moderator - 05-13-16 07:24 AM
Tom,
It's unclear why you have attached the DSM300G's barcode label to this thread.
RE: Upgrading system - schlaag - 05-13-16 10:43 AM
Sorry that was my fault. Wanted you to have the serial number of the DSM300 that won't power up. I can send a pic of the status light as well. I went through the procedure that you listed earlier and still no go. Thanks! Tom.
RE: Upgrading system - Chuck - Raymarine - Moderator - 05-13-16 12:10 PM
Tom,
Per the previously referenced FAQ, should you have addressed the troubleshooting items specified therein and a problem persists, then the DSM should be sent to Raymarine’s Product Repair Center to be bench checked.
RE: Upgrading system - schlaag - 05-13-16 01:07 PM
Again. Many thanks! Tom
RE: Upgrading system - Chuck - Raymarine - Moderator - 05-13-16 01:18 PM
You're welcome.
RE: Upgrading system - schlaag - 05-24-16 01:34 PM
Hi Chuck, can I mix a ES127 with a ES128 and potentially use both styles of sounders??
RE: Upgrading system - Chuck - Raymarine - Moderator - 05-24-16 02:15 PM
Tom,
It is indeed possible to do as you have suggested. Onboard my own boat, I operate a 600W 50/200kHz conical sounding (via e7D), CHIRP conical / DownVision (via a78), SideVision (via CP200), and 1kW 50/200kHz conical sounding (via DSM300) all within a single networked system of a/c/e/eS/gS-Series MFDs.
RE: Upgrading system - schlaag - 05-24-16 02:49 PM
Very cool. Again you are an excellent resource! Tom
RE: Upgrading system - Chuck - Raymarine - Moderator - 05-24-16 02:57 PM
You're welcome.
RE: Upgrading system - schlaag - 06-01-16 10:07 AM
Hi Again Chuck, I just ordered a ES127 and a ES128. I am also changing out the Clarion CMD5 to the Fusion so I can use the Raymarine/Fusion functionality. What is the easiest way to connect the SeaTalk HS to NMEA2000 (cables etc)? Thanks again!