+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: [LW] [LW11] Raymarine S1000 bare wire connection to Garmin Echomap Chirp (/showthread.php?tid=7593)
[LW11] Raymarine S1000 bare wire connection to Garmin Echomap Chirp - sebastian - 03-06-19 06:15 PM
Hi, I am trying to determine the bare wire connection for a Raymarine S1000 to Garmin echomap FF and plotter.
The Garmin has 4 wires for NMEA 0183 and I want to know which bare wire colors to connect them to on the Raymarine S1000.
Garmin
1)NMEA 0183 Rx (in) is a BROWN Wire
2)NMEA 0183 Tx (out) is a BLUE Wire
3) Ground wire (power and nmea) is a BLACK wire
4)Power is a RED wire.
The Raymarine S1000 has 4 wires:
1) -ve out is a BROWN wire
2)+ve out is a Green wire
3)+ve in is an ORANGE wire
4) -ve in is a Blue wire
Thank you in advance for your help!
RE: [LW11] Raymarine S1000 bare wire connection to Garmin Echomap Chirp - Louise - Raymarine - Moderator - 03-07-19 07:50 AM
Dear sebastian,
Thank you for your query.
To send data from the S1000 to the Garmin, you will need to connect as follows;
S1000 +ve out is a Green wire > NMEA 0183 Rx (in) is a BROWN Wire
S1000 -ve out is a BROWN wire > Garmin Ground wire (power and NMEA) BLACK wire
To connect data from the Garmin to the S100, you will need to connect as follows;
Garmin NMEA 0183 Tx (out) is a BLUE Wire >S1000 +ve in is an ORANGE wire
Garmin Ground wire (power and NMEA) BLACK wire > S1000 -ve in is a Blue wire
You will need to check what NMEA0183 sentences are RX TX by both products to ensure the data you want is available.
Many Thanks
Louise