+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Networking / System Integration (/forumdisplay.php?fid=21)
+--- Thread: [CA] [CA11] TackTick NMEA GPS to MFD to ST1000+ (/showthread.php?tid=7677)
[CA11] TackTick NMEA GPS to MFD to ST1000+ - pkonecom - 03-16-19 03:57 AM
Hi!
Setup: TackTick 110, 111, 112, Fluxgate, MicroTalk, A-Series, ST1000+
I have added a 122 NMEA Interface and connected a GPS (Evermore). GPS data will be shown at the Displays but not in the A-Series MFD. Was a redundancy idea.
All other TackTick Data will be shown in the A-Series.
I want(ed) to connect the ST1000+ to the NMEA Out of the 122 Interface and control the ST1000 by the A-Series. So the dataflow will be a-series - microtalk - (TackTick - microtalk) - T122 - St1000+.
Any suggestion?
Cheers, Peter
RE: [CA11] TackTick NMEA GPS to MFD to ST1000+ - Chuck - Raymarine - Moderator - 03-19-19 02:50 PM
Welcome to the Raymarine Forum Peter,
Which model of "A-Series" MFD do you own?