+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Networking / System Integration (/forumdisplay.php?fid=21)
+--- Thread: [CA] [CA11] Connect Yanmar 3JH4E to SeaTalkng Network (/showthread.php?tid=7695)
[CA11] Connect Yanmar 3JH4E to SeaTalkng Network - ventus - 03-19-19 07:48 AM
Hello,
I was wondering how I can connect my Yanmar 3JH4E engine to my existing Raymarine SeaTalkng network to display the engine stats on my Axiom 7 and 9 networked displays. I see there is an ECI-100 but I don't see my engine listed in the list of compatible engines.
If I can connect this engine, what will I need, how will it be done and what type of data should I expect to see?
RE: [CA11] Connect Yanmar 3JH4E to SeaTalkng Network - Chuck - Raymarine - Moderator - 03-19-19 11:01 AM
ventus,
How old is the subject Yanmar engine?
RE: [CA11] Connect Yanmar 3JH4E to SeaTalkng Network - ventus - 03-21-19 02:23 PM
Hi Chuck, it is a 2005/2006 model. The boat is a 2006 but it was built in 2005.
RE: [CA11] Connect Yanmar 3JH4E to SeaTalkng Network - Chuck - Raymarine - Moderator - 03-21-19 03:03 PM
ventus,
Unfortunately, it would appear that the ECI-100 is not compatible with this engine. Other engine gateways to consider would be Maretron's J2K100 or possibly one of the engine gateways from Yacht Devices.