+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] [CA11] Adding Sonar Charts to MFD C140W (/showthread.php?tid=7776)
[CA11] Adding Sonar Charts to MFD C140W - tyed - 03-27-19 12:56 PM
I was able to add sonar charts to my new CF card but can't seem to figure out how to make it display on my plotter. Any help?
Thanks.
RE: [CA11] Adding Sonar Charts to MFD C140W - Chuck - Raymarine - Moderator - 03-27-19 01:09 PM
Welcome to the Raymarine Forum tyed,
When operating with the final C-Series Widescreen MFD software update (v2.35), the command sequence PRESENTATION->CHART LAYERS->CHART TYPE->FISH executed within the Chart application will cause the MFD to display Navionics SonarCharts cartography stored on the Navionics chart card.
RE: [CA11] Adding Sonar Charts to MFD C140W - tyed - 03-28-19 02:27 PM
Thanks
RE: [CA11] Adding Sonar Charts to MFD C140W - Chuck - Raymarine - Moderator - 03-28-19 04:04 PM
You're welcome.