+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Networking / System Integration (/forumdisplay.php?fid=21)
+--- Thread: [LW] [LW11] Seatalk1 to Seatalkng and Axiom 7, I70s MFD (/showthread.php?tid=8031)
[LW11] Seatalk1 to Seatalkng and Axiom 7, I70s MFD - Rob Vink - 04-24-19 01:56 PM
Previous setup:
ST60+ and ST50 instruments connected with SPX5 Course computer.
i70s MFD connected to SPX 5 with A06047 Seatalk1 to Seatalkng converter cable.
This works fine.
New situation:
Same equipment but Axiom 7 added.
Seatalkng backbone with E22158 converter kit.
Axiom 7 and i70s MFD connected via backbone.
I used the A06047 cable to connect to the SPX5 (red lead not connected).
Axiom 7 works and also displays Seatalk1 data.
Power spur cable connected to battery. Led indicator E22158 shows both seatalkng and seatalk1 are healthy.
i70s does not power up.
Q: Could the A06047 cable be the problem and should I use the converter cable supplied with the E22158 kit and connect this cable to the SPX5? Or is something else causing the problem with the i70s?
RE: [LW11] Seatalk1 to Seatalkng and Axiom 7, I70s MFD - Louise - Raymarine - Moderator - 04-26-19 09:53 AM
Dear Rob Vink,
Can you provide a system diagram, only needs to be a sketch.
Did you cut the A06047? Where does the STng plug in to?
Many Thanks
Louise
RE: [LW11] Seatalk1 to Seatalkng and Axiom 7, I70s MFD - Rob Vink - 05-05-19 06:34 AM
Dear Louise,
I found out that the i70s is dead. I took it to my dealer and they connected it to a Seatalkng network.
I did cut the A06047 and connected it the SPX5 (not the red lead).
I do see Seatalk1 data on my Axiom 7 so that's ok I think.
The i70s is sent for repair.
Best regards,
Rob
RE: [LW11] Seatalk1 to Seatalkng and Axiom 7, I70s MFD - Louise - Raymarine - Moderator - 05-08-19 05:38 AM
Thank you for the update.