Raymarine forum
[CA] [CA11] Integrating a 250 AIS - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: AIS (/forumdisplay.php?fid=22)
+--- Thread: [CA] [CA11] Integrating a 250 AIS (/showthread.php?tid=8052)

[CA11] Integrating a 250 AIS - morepower - 04-26-19 02:37 PM

Hi, I've been given a Raymarine 250 AIS unit... Which I'd like to add to my Raymarine system...

I notice that it connects via nema... I have a A50D Classic and a 230E VHF and also a Smart Heading system... I presume it would be best connected to the A50D or to the VHF?

Any suggestions inc wiring would be most helpful



RE: [CA11] Integrating a 250 AIS - Chuck - Raymarine - Moderator - 04-29-19 12:17 PM

Welcome to the Raymarine Forum Tim,

Per the FAQ found here, AIS receivers or AIS transceivers must be interfaced to the MFD's NMEA 0183 port (See the wiring chart below).

[Image: attachment.php?aid=2924]

The NMEA 0183 output terminals of the SHS may be interfaced to the MFD's NMEA 0183 Port #2 Input leads.