+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [DG] [DG11] Can't connect autopilot to axium 9 mfd (/showthread.php?tid=8063)
[DG11] Can't connect autopilot to axium 9 mfd - galhuino - 04-29-19 04:47 AM
I have an axiom 9 mfd with latest updates connected to raymarine auto pilot, but in the settings menu the option to connect the autopilot is grayed out and I can't find the solution.
In the attachment is a photo of the autopilot in the connected devices
RE: [DG11] Can't connect autopilot to axium 9 mfd - Derek - Raymarine - Moderator - 04-29-19 10:32 AM
Hi galhuino
Thankyou for your enquiry,
The SPX autopilot can be connected to the AXIOM through STng or the SeaTalk to STng interface. heading from the autopilot can be shared with the AXIOM, however, the AXIOM cannot be used as a controller for the SPX autopilot, hence the reason the Autopilot option on AXIOM is greyed out. Only the current Evolution system is fully compatible and controllable by the AXIOM.
Please refer to this link for more information regarding the interfacing between SPX autopilots and AXIOM.
regards
Derek