Raymarine forum
[CA] [CA11] Axiom Pro - waypoints remain in chart - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] [CA11] Axiom Pro - waypoints remain in chart (/showthread.php?tid=8271)



[CA11] Axiom Pro - waypoints remain in chart - terje.gaardsmoen@gmail.com - 05-18-19 05:08 AM

When unloading (select not to show the route) a route - the waypoint remain in the chart - only the lines between the waypoint desepares.

When we are racing several different cources within i day this makes the chart "busy" with dots

Thank you for input how to solve this


RE: [CA11] Axiom Pro - waypoints remain in chart - Chuck - Raymarine - Moderator - 05-21-19 11:52 AM

Welcome to the Raymarine Forum Terge,

As you have suggested, commanding a route to be hidden will cause the route's leg lines to be hidden, but its waypoints will remain on the screen. You will find that the command sequence MENU->WAYPOINTS, ROUTES, AND TRACKS->SHOW/HIDE (WAYPOINTS)->HIDE ALL will hide all of the waypoints via a single command. After doing so, then the desired route may be selected to be navigated/shown within the Chart application.