Raymarine forum
[CA] [CA11] Axiom not connecting via Bluetooth to iPhone - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Product Selection Assistance (/forumdisplay.php?fid=124)
+--- Thread: [CA] [CA11] Axiom not connecting via Bluetooth to iPhone (/showthread.php?tid=8458)



[CA11] Axiom not connecting via Bluetooth to iPhone - ktcarter - 06-04-19 09:42 AM

Can Axiom 9" MFD (LightHouse 3.9) bluetooth pair with my iPhone (IOS 12.3 operating system)?
I tried to pair the 2 devices using bluetooth.

Both devices were able to find each other with codes so I hit the pair buttons on both devices but they still could not connect???

I get a notice "Raymarine E70367 is not supported" on my phone.

I am wanting to Sync my Navionics tracks, routes, & waypoints.


RE: [CA11] Axiom not connecting via Bluetooth to iPhone - Chuck - Raymarine - Moderator - 06-05-19 10:56 AM

Welcome back to the ktcarter,

The Navionics Boating app and the MFD running LightHouse 3 or LightHouse II software are designed to communicate with one another via Wi-Fi, not Bluetooth communications technology. That said, and as indicated within a thread in which I recently addressed this subject, Navionics has acknowledged a fault within the Navionics software libraries included within the LightHouse 3 v3.9.46 software update which will prevent the waypoint/route synchronization feature from working. Should one be unable to get the Boating app's synchronization feature to work, then it would be necessary either wait for the LightHouse 3 v3.10.x software update to be released or to downgrade the MFD's software to 3.8.105.


RE: [CA11] Axiom not connecting via Bluetooth to iPhone - ktcarter - 06-18-19 02:51 PM

Thanks Chuck,
I used the wi-fi option as you suggested and all worked well.


RE: [CA11] Axiom not connecting via Bluetooth to iPhone - Chuck - Raymarine - Moderator - 06-18-19 04:01 PM

You're welcome.