[CA] [CA11] ST 69 - Printable Version +- Raymarine forum (http://forum.raymarine.com) +-- Forum: Raymarine Forums (/forumdisplay.php?fid=1) +--- Forum: Fishfinders (/forumdisplay.php?fid=25) +--- Thread: [CA] [CA11] ST 69 (/showthread.php?tid=8486) |
[CA11] ST 69 - RKW68 - 06-07-19 06:38 AM I have a ST 69 speed and Temp that I would like to integrate into my new setup that I am working on. I have a ES127 installed and will be adding a HS5 network switch, CP470 and a M265 transducer which will replace the existing M260. How do I do this? RE: [CA11] ST 69 - Chuck - Raymarine - Moderator - 06-07-19 08:51 AM Welcome to the Raymarine Forum RKW68, Was the ST69 previously connected to a Y-Cable which had been interfaced to the M260 transducer and to the DSM300? If so, then this Y-Cable would need to be replaced with the A80345 Y-Cable which would be connected to the ST69, the M265, and the CP470. RE: [CA11] ST 69 - RKW68 - 06-07-19 12:36 PM I recently removed the RL80C and the DSM250, I don't remember a Y cable being attached. How is the A80345-Y cable connected between the various pieces ? RE: [CA11] ST 69 - Chuck - Raymarine - Moderator - 06-07-19 01:07 PM The A80345 Y-Cable features a plug which is designed to be mated to the CP470's socket, a socket which is designed to be mated to 1kW CHIRP transducers, and a socket which is designed to be plugged into speed/temp transducers which had been designed for use with a DSM250, DSM30, DSM300, CP300, or CP370. RE: [CA11] ST 69 - RKW68 - 06-07-19 01:22 PM Thank you... RE: [CA11] ST 69 - Chuck - Raymarine - Moderator - 06-07-19 01:38 PM You're welcome. |