[TG] [TG11] No Pilot - Printable Version +- Raymarine forum (http://forum.raymarine.com) +-- Forum: Raymarine Forums (/forumdisplay.php?fid=1) +--- Forum: Autopilots (/forumdisplay.php?fid=23) +--- Thread: [TG] [TG11] No Pilot (/showthread.php?tid=8495) |
[TG11] No Pilot - Garthh - 06-07-19 04:51 PM Standard 2016 Riviera 445 configuratuion from factory e125 MFD's, PR70R autopilot controller,Volvo EV2 network Issue; the MFDs and controller say No Pilot. The autopilot will follow a course vector but not a route as the error no pilot isc returned Setup? What should we check? The instructions suggest the network connections for 'No Pilot' error but as it steers to a compass vector and changing manually on the controller all would appear connected? RE: [TG11] No Pilot - Tom - Raymarine - Moderator - 06-12-19 01:43 AM Hello Garthh, Are you sure that the error message is 'No Pilot'? That specific error means no communication between the p70/e125s and the EV2, but if the pilot steers ok in Auto mode then that connection must be working. I would expect a different error message if the problem related only to Track mode (steering to route data.) Thanks, Tom |