+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Networking / System Integration (/forumdisplay.php?fid=21)
+--- Thread: [CA] [CA11] a seris tranducer to dsm 300 (/showthread.php?tid=8525)
[CA11] a seris tranducer to dsm 300 - Tommyd - 06-10-19 01:42 PM
Subject is self explaining. I am going from a a70 machine to a 140w and my transducer, airmar, has no issues. the cable hover does not match up. I believe i am going to use a cable to my 300, e66009, then splice to my existing transducer cable. there was a junction box they used for this in the past but i don't believe i need it. Any thoughts or recommendations?
thanks
RE: [CA11] a seris tranducer to dsm 300 - Chuck - Raymarine - Moderator - 06-11-19 04:03 PM
Welcome to the Raymarine Forum Tommy,
Please click here to view a FAQ addressing splicing transducer cables. At one time Airmar had offered an A-Series Transducer Adapter to permit these transducers to be mated to a DSM30/300. It is recommended that Gemeco, Inc. (Airmar’s US distributor (803 693 0777)) be contacted to determine whether this adapter cable is still available.