+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Product and Feature Suggestions (/forumdisplay.php?fid=128)
+--- Thread: [CA] [CA11] Ruler on Old E120 Classic, to Lighthouse 3 Software (/showthread.php?tid=8559)
[CA11] Ruler on Old E120 Classic, to Lighthouse 3 Software - Fish On - 06-12-19 03:40 PM
On my old E120 classic, there Was a ruler feature were you can measure two points anywere on the screen. You can start from your vessel, or choose a spot, to another spot, and it would tell you the exact mileage.
Hopefully this feature can be added to the next lighthouse 3 software update, on future update.
Thanks.
RE: [CA11] Ruler on Old E120 Classic, to Lighthouse 3 Software - Chuck - Raymarine - Moderator - 06-13-19 10:37 AM
Welcome to the Raymarine Forum Fish On,
Several features from LightHouse II software (LHII to LH3 Gap Features) remain to be implemented. This and the cursor range and bearing data items are two such features. Raymarine has logged the request for these features which will be considered for inclusion within a future LightHouse 3 software update.
Please click here more information concerning product and feature suggestions.
RE: [CA11] Ruler on Old E120 Classic, to Lighthouse 3 Software - Fish On - 06-13-19 06:02 PM
Thank You!!
RE: [CA11] Ruler on Old E120 Classic, to Lighthouse 3 Software - Chuck - Raymarine - Moderator - 06-17-19 09:17 AM
You're welcome.