Raymarine forum
[CA] [CA11] Update Axiom 7 - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] [CA11] Update Axiom 7 (/showthread.php?tid=8677)



[CA11] Update Axiom 7 - slavanway - 06-26-19 06:58 AM

I bought an Axiom 7 in early 2018 to replace instruments damaged in Irma 2017.

In June 2019 I finished the install and bringing it all on line. I checked the software version on the Axiom 7 and it was 3.9.46 and last updated on 02/17/2017.

This is the latest version of the software and updated in April 2019. I have not updated the software before. When I download the software, put it on a 64GB mSD card, inserted it into the mSD slot in the Axiom 7 (where the chart chip normally goes) no updated software is found.

My questions are;

1. How did 3.9.46 get on the MFD?
2. Is there something obvious I am missing?

Thanks,
Sam


RE: [CA11] Update Axiom 7 - Chuck - Raymarine - Moderator - 06-26-19 02:09 PM

Welcome to the Raymarine Forum Sam,

Please click here to view a FAQ addressing this subject. I suspect that you will find that the microSD memory card used to perform the update is either incorrectly formatted or has been incorrectly populated with the software update files.