Raymarine forum
C120/DSM300 No Data Source - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: General Discussions (/forumdisplay.php?fid=2)
+--- Thread: C120/DSM300 No Data Source (/showthread.php?tid=8749)



C120/DSM300 No Data Source - Tombac3 - 07-02-19 11:12 AM

I have a C120 MFD with a DSM300/Airmar B-160 and am currently having issues with No data Source/DSM Connection Lost. It started out with intermittent DSM Connection Lost and progressively got worse. For a while, the DSM would flash an amber code 8 while malfunctioning. I have checked voltage supply (12.6 vdc), connection and pin integrity as well as cable integrity, to no avail. I now have a No Data Source with a momentary green flicker to constant amber LED status on my DSM. Also, in the fishfinder setup page, all of my DSM and transducer functions are now greyed out.


RE: C120/DSM300 No Data Source - Louise - Raymarine - Moderator - 07-09-19 07:48 AM

Dear Tombac3,

I recommend you send the DSM300 in for testing, you can book this in online via our website here.

Many Thanks
Louise