+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Instruments (/forumdisplay.php?fid=117)
+--- Thread: [DG] [DG11] Do I have an ST50 or ST50+ wind display? (/showthread.php?tid=8800)
[DG11] Do I have an ST50 or ST50+ wind display? - Carib - 07-08-19 06:59 AM
Hi,
My boat has an ST50 or ST50+ wind display, but I can't work out which it is.
Looking at the product manuals, the ST50 and 'plus' seem identical - but I understand these have different networking capabilities depending on the model, which I will ask about when i know..
Please see the attached photo. Note the left button is marked 'CAL' as this seems to be marked differently on some displays.
There is also a serial no. on the back which is Z1350230689.
The transducer is the older style with square cups.
Thanks!
RE: [DG11] Do I have an ST50 or ST50+ wind display? - Derek - Raymarine - Moderator - 07-09-19 11:32 AM
Hi Carib,
Thank you for your enquiry,
Both the ST50 and ST50+ used the masthead Transducer with the squarish style cups, so that does not imply one version or the other.
The differences were quite subtle, if the CAL button had a stylised LAMP ICON next to it - that would confirm it was ST50+, also if you can press the CAL button down for 12 seconds and get a cal menu to change the data damping on the needle or LCD, that is also an ST50+ display.
regards
Derek
RE: [DG11] Do I have an ST50 or ST50+ wind display? - Carib - 07-10-19 09:10 AM
Thanks Derek, that is helpful and I'll try the calibration test suggested.
RE: [DG11] Do I have an ST50 or ST50+ wind display? - Derek - Raymarine - Moderator - 07-11-19 10:59 AM
Hi Carib,
you're welcome, best regards
Derek