+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] [CA11] Question on Transducer and MFD (/showthread.php?tid=8954)
[CA11] Question on Transducer and MFD - tonyiiiafl - 07-21-19 08:49 AM
I presently have Ray e127 and e97 networked together with a Q2, Ray 130(?) GPS Antenna and a B744 transducer. All are shared between the two. I was thinking of upgrading to Axiom or Element. Questions are here:
If I upgrade to Axiom, can I use the chirp/downvision transducer combined with the new set up ALONG with the B744.?
I was also thinking of in networking the two. Have one as a Q2, with the B744, the other with the newer transducer and sharing the RayGPS antenna? Do able or do I need to run separate GPS receiver antennas? I am NOT a fan of the internal antenna.
Thanks!
RE: [CA11] Question on Transducer and MFD - Chuck - Raymarine - Moderator - 07-24-19 03:35 PM
Welcome back to the Raymarine Forum Tony,
Q1. If I upgrade to Axiom, can I use the chirp/downvision transducer combined with the new set up ALONG with the B744.?
A1. Yes
Q2. I was also thinking of in networking the two. Have one as a Q2, with the B744, the other with the newer transducer and sharing the RayGPS antenna?
A2. This is indeed possible. All data and resources is shared between Axiom/Axiom Pro/Axiom XL MFDs via Ethernet communications.