+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: [CA] [CA11] How to use ACU-150 with My new Lowrance HDS-12-live (/showthread.php?tid=9159)
[CA11] How to use ACU-150 with My new Lowrance HDS-12-live - Dengle - 08-05-19 12:17 PM
What does it take to hook my new ACU-150 installed in spring to my just purchased Lowrance HDS-12-Live. Hardware? Software?
RE: [CA11] How to use ACU-150 with My new Lowrance HDS-12-live - Chuck - Raymarine - Moderator - 08-07-19 10:02 AM
Welcome to the Raymarine Forum Dengle,
Q. What does it take to hook my new ACU-150 installed in spring to my just purchased Lowrance HDS-12-Live. Hardware? Software?
A. From a networking standpoint, Evolution autopilots and the Lowrance HDS-12-Live both support NMEA 2000 communications. The currently installed powered and properly terminated SeaTalkng / NMEA 2000 backbone which is interfacing the Evolution autopilot components to one another will need to be extended to the location of the Lowrance HDS-12-Live, where an additional spur socket will be added. The Lowrance HDS-12-Live may be interfaced to this spur socket via either of the following adapter cables:
- A06045 15.7in (0.4m) SeaTalkng Spur to DeviceNet (F) Adapter Cable
- A06075 39.4in (1.0m) SeaTalkng Spur to DeviceNet (F) Adapter Cable