+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Fishfinders (/forumdisplay.php?fid=25)
+--- Thread: [TG] B164 and DSM370 settings on a C90W (/showthread.php?tid=9192)
B164 and DSM370 settings on a C90W - Jett Ward - 08-07-19 07:21 PM
On the C90W within the fish finder settings, what should the Speed Offset normally be set at?
Fish finder transducer settings:
Select speed transducer... Auto
Depth offset... 0.0
Speed offset... ???%
Temperature offset... 0.0
RE: B164 and DSM370 settings on a C90W - Tom - Raymarine - Moderator - 08-15-19 11:31 PM
Hello Jett,
If you have a speed transducer connected to your CP370 (there's not one in the B164 and most people don't have one), this allows you to fine-tune the speed data to suit the water flow over your hull so that it reads correctly. This is a vessel-specific setting so there's no one right answer. If you don't have a speed transducer connected to the CP370 then this has no effect.
Regards,
Tom