Raymarine forum
[TG] Element 9 HV Transducer - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [TG] Element 9 HV Transducer (/showthread.php?tid=9198)



Element 9 HV Transducer - brewvet63 - 08-08-19 07:35 AM

Looking for recommendations for a transducer for a Element 9 HV. I have a 30' Carver Flybridge with dual I/O's. I have the HV-100, would this work for this boat or would the HV-300TH single or pair be a better choice?

Thanks


RE: Element 9 HV Transducer - Tom - Raymarine - Moderator - 08-16-19 01:19 AM

Hello brewvet63,

The I/Os are likely to block the SideVision/RealVision view out to either side, so if you can fit a through-hull transducer that's definitely going to give a better view out to the side. If you can fit a single transducer right on the centreline great, if not you'll need the split pair so that you can see each side. The split pair through-hulls will I think be what you need to end up with to get good performance.

Regards,
Tom