+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Networking / System Integration (/forumdisplay.php?fid=21)
+--- Thread: [CA] [CA11] COntrol of Evolution EV200 from e97/e127 (/showthread.php?tid=9271)
[CA11] COntrol of Evolution EV200 from e97/e127 - tonyiiiafl - 08-15-19 07:23 PM
My Evolution is installed and dockside wizard completed. Sea trail to set sensor is this weekend. Can I control this from the MFD? Also, once I bring up a track or route on the MFD, and I press “follow route/track†Does the pilot take over automatically?
Thank you
RE: [CA11] COntrol of Evolution EV200 from e97/e127 - Chuck - Raymarine - Moderator - 08-21-19 10:20 AM
Welcome back to the Raymarine Forum Tony,
Q1. Can I control this (autopilot) from the MFD?
A1. Yes. You will need to enable the LightHouse II Autopilot Controls feature (HOME->SET-UP->SYSTEM SETTINGS->EXTERNAL DEVICES->PILOT SET-UP->PILOT CONTROL) and Pilot bar feature (HOME->SET-UP->SYSTEM SETTINGS->EXTERNAL DEVICES->PILOT SET-UP->PILOT BAR). Detailed information on this subject may be found within Chapter 7: Autopilot control of the LightHouse II Release 19 Operating Instructions.
Q2. Once I bring up a track or route on the MFD, and I press “follow route/track†Does the pilot take over automatically?
A2. Yes. Onscreen prompts will be displayed.
RE: [CA11] COntrol of Evolution EV200 from e97/e127 - tonyiiiafl - 08-21-19 06:36 PM
It appears that the link has changed locations?
RE: [CA11] COntrol of Evolution EV200 from e97/e127 - Chuck - Raymarine - Moderator - 08-22-19 08:01 AM
Tony,
I tested the link to the LightHouse II Advanced Operations Guide within my last post and it does indeed open this document within Box.