Raymarine forum
[CA] [CA11] Can Axiom Pro Knob/Buttons Control Multiple MFDs? - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Product and Feature Suggestions (/forumdisplay.php?fid=128)
+--- Thread: [CA] [CA11] Can Axiom Pro Knob/Buttons Control Multiple MFDs? (/showthread.php?tid=9626)



[CA11] Can Axiom Pro Knob/Buttons Control Multiple MFDs? - scooper321 - 09-29-19 08:06 PM

The RMK-10 be networked with Axiom MFD’s on RayNet to control multiple Axiom MFD’s. But the Axiom Pro units have these same controls built in. So, if you were to connect an Axiom Pro and an Axiom via RayNet, could you use the Axiom Pro’s buttons/knob to control BOTH the Axiom Pro and the networked Axiom MFD’s in the same way you could if you networked an RMK-10? That is, could the Axiom Pro’s controls be used to also control the networked Axiom?


RE: [CA11] Can Axiom Pro Knob/Buttons Control Multiple MFDs? - Chuck - Raymarine - Moderator - 10-02-19 08:27 AM

Welcome back to the Raymarine Forum Steve,

Q. if you were to connect an Axiom Pro and an Axiom via RayNet, could you use the Axiom Pro’s buttons/knob to control BOTH the Axiom Pro and the networked Axiom MFD’s in the same way you could if you networked an RMK-10?
A. Negative. This feature is currently limited to systems featuring a RMK-9 or RMK-10. That said, a feature request will be logged to consider this feature for inclusion within a future LightHouse 3 software update as well as within future MFD designs.

Please click here more information concerning Feature suggestions.