+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Fishfinders (/forumdisplay.php?fid=25)
+--- Thread: [LW] [LW11] RV-100 transducer elements arrangement (/showthread.php?tid=9723)
[LW11] RV-100 transducer elements arrangement - Markus - 10-13-19 04:50 AM
Could some Raymarine technician explain how the various elements are arranged / positioned in RV-100 from fore to aft? The purpose is to optimize my transom installation, see pic.
RE: [LW11] RV-100 transducer elements arrangement - Louise - Raymarine - Moderator - 10-23-19 05:44 AM
Dear Markus,
Thank you for your post. We are unable to provide the positioning of the elements inside the transducer as this is confidential information.
I have sent your request to the product manager to see if we can provide the beam angles.
Many Thanks
Louise
RE: [LW11] RV-100 transducer elements arrangement - Markus - 10-23-19 12:28 PM
ok, I partly understand...
Anyway, I appreciate any information that could help me to improve the RV-100 performance at planing speeds to avoid loss the conical chirp element reading. It seems really difficult to find right tranducer adjustment in terms of horizontal tilting and vertical height. Never experienced such tricky transducer to install...believe me I have done some trial on this.
Thanks
RE: [LW11] RV-100 transducer elements arrangement - Louise - Raymarine - Moderator - 10-25-19 07:29 AM
Can you contact myself at support.uk@raymarine.com
Many Thanks
Louise