+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Instruments (/forumdisplay.php?fid=117)
+--- Thread: [CA] [CA11] ST60 Wind Speed error (/showthread.php?tid=9751)
[CA11] ST60 Wind Speed error - Ginodelg - 10-17-19 04:36 PM
Hello,
I have an ST60 Wind instrument installed on my boat. For some reason the wind speed keeps jumping up to 99. I installed a new wind transducer at the top of the mast but the same thing is happening. However, when I look at the wind speed on the chart plotter, the speed seems to be accurate. Any ideas?
RE: [CA11] ST60 Wind Speed error - Chuck - Raymarine - Moderator - 10-21-19 10:50 AM
Welcome to the Raymarine Forum Ginodelg,
It is recommended that the ST60 Wind Instrument be reset to Factory Default calibration settings and that the transducer then be re-calibrated to address the reported symptom. Details for resetting Factory Default calibration settings may be found on page 33 of the ST60 Wind Instrument Owner's Manual.