+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: [DG] [DG11] Rudder reference Range (/showthread.php?tid=9845)
[DG11] Rudder reference Range - engenharia2 - 11-04-19 01:04 PM
Hey Guys, How are you? I hope you well
We have a problem in a system with a ACU 300 and a third part rudder reference, we could not finish the docksize wizard, the system always stopped before the end, I saw that our rudder work has a range of 5K, but Do you know the maximum and minimum that our system recognize? The system recognized the sides, if I steer do STD or Port, P70RS showed without problem, but if I press AUTO a Error Message appear. The system could identify the magnetics but does not matters what I try the rudder limit is always 10 degrees.
Do you have any ideas to test in the system?
Thanks in advance
Felipe Muniz
RE: [DG11] Rudder reference Range - Derek - Raymarine - Moderator - 11-07-19 10:45 AM
Hi Felipe,
We would of course advise using the Raymarine Rudder reference unit. This has a max range of 5k ohm and potentiometer has a full deflection from one end of the resistance to the other of 340 degrees, in practice the effective rudder deflection is + or - 70 degrees either side of the central position, ( which will be 2.5K).
Does this help?
Regards
Derek