Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
es98 gps
07-22-16, 02:21 AM
Post: #1
es98 gps
hi i was wondering if the es98 will work with rs125 gps antenna?
Find all posts by this user
Quote this message in a reply
07-22-16, 09:29 AM (This post was last modified: 07-22-16 09:29 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: es98 gps
Welcome to the Raymarine Forum echow,

As the Raystar 125 GPS Sensor can support either a NMEA 0183 and SeaTalk communications protocol depending upon how it is interfaced to the system. Many will elect to interface the GPS sensor to the SeaTalkng backbone to permit GPS data to be available to other devices (ex. VHF radio, instruments, etc.) which have been interfaced to the backbone when MFD is switched OFF. This may be accomplished by using interfacing a SeaTalk to SeaTalkng Converter as part of the system's SeaTalkng backbone. The easiest way to interface the Raystar 125 GPS Sensor to the eS98 MFD is as a NMEA 0183 GPS Sensor per the chart below:

[Image: attachment.php?aid=416]


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)