Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
i50 depth sounder to replace an ST 60 D S
08-09-16, 09:09 AM
Post: #1
i50 depth sounder to replace an ST 60 D S
I have an ST60 tri data that has a dark spot on the screen. I was told I could replace the unit with with the new i50. I bought the new unit and now realize that it will not work with the Sea Talk system that I presently have. My devices are 2003. Is there a way to connect it to the sea talk system?
Find all posts by this user
Quote this message in a reply
08-25-16, 04:24 PM
Post: #2
RE: i50 depth sounder to replace an ST 60 D S
Welcome to the Raymarine Forum Jeff,

Actually, the interfaces of the i50/i60 instruments will support either SeaTalkng or SeaTalk communications protocols. These instrument displays are packaged with a SeaTalkng to SeaTalk Cable. To interface the i50/60 instrument in place of the ST60 instrument, the SeaTalk cable will be to be unplugged from the ST60 instrument and instead connected to a D244 SeaTalk Junction Block. The SeaTalkng to SeaTalk Cable supplied with the i50/i60 instrument will then be used to mate the i50/i60 instrument to the D244 SeaTalk Junction Block.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)