Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] polar download to es78
07-17-17, 02:25 PM (This post was last modified: 07-25-18 08:54 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] polar download to es78
hi
I am having a problem downloading my polar to my es78 mfd.

I am receiving an error message "file format not compatible "

I have installed the latest sw on the mfd, ver 19.xx


Attached File(s)
.csv  cs polars csv comma.csv (Size: 614 bytes / Downloads: 567)
Find all posts by this user
Quote this message in a reply
07-18-17, 09:57 AM (This post was last modified: 07-25-18 08:55 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] polar download to es78
Welcome to the Raymarine Forum Ross,

We are currently investigating the problem with your polars file. For clarification, was your polars file produced on an Apple computer or on a PC?
Find all posts by this user
Quote this message in a reply
07-20-17, 01:18 PM (This post was last modified: 07-25-18 08:55 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] polar download to es78
thanks Chuck

it was windows 7 and office XL
Ross
Find all posts by this user
Quote this message in a reply
07-21-17, 11:03 AM (This post was last modified: 07-25-18 08:57 AM by Chuck - Raymarine - Moderator.)
Post: #4
RE: [CA11] polar download to es78
Ross,

I have identified the problem within your polars file. One of the numerical data items featured a comma rather and a decimal point. The attached file will successfully import.


Attached File(s)
.csv  Revised Polars.csv (Size: 674 bytes / Downloads: 682)
Find all posts by this user
Quote this message in a reply
07-21-17, 01:02 PM (This post was last modified: 07-24-17 08:34 AM by Chuck - Raymarine - Moderator.)
Post: #5
RE: polar download to es78
Thanks Chuck
I appreciate your help

have a great weekend
Ross
Find all posts by this user
Quote this message in a reply
07-24-17, 08:35 AM (This post was last modified: 07-25-18 08:57 AM by Chuck - Raymarine - Moderator.)
Post: #6
RE: [CA11] polar download to es78
You're welcome.
Find all posts by this user
Quote this message in a reply
07-24-18, 05:08 PM (This post was last modified: 07-25-18 08:57 AM by Chuck - Raymarine - Moderator.)
Post: #7
RE: [CA11] polar download to a series
Where can I find information regarding procedure to import polar lines into my a97?
Best regards
Find all posts by this user
Quote this message in a reply
07-25-18, 08:53 AM (This post was last modified: 07-25-18 08:58 AM by Chuck - Raymarine - Moderator.)
Post: #8
RE: [CA11] polar download to es78
Welcome to the Raymarine Forum francisco,

Q. Where can I find information regarding procedure to import polar lines into my a97?
A. The information which you are seeking is detailed within Chapter 14.19 Polar tables of the LightHouse II Release 19 Operating Instructions.
Find all posts by this user
Quote this message in a reply
07-30-18, 12:54 PM
Post: #9
RE: [CA11] polar download to es78
Hi chuck, thank you very much for your prior response regarding polar lines. I created an excel file (extension .csv).

The problem I found was when trying to transfer data to my MFD.

I inserted the micro SD card in the second slot (in the first slot I had the Navionics+) and the MFD didn't read it. I switched it to the first slot with the same result.

The Micro SD card I used for Navionics+ is 8G (with this one I have no problems) and the second Micro SD card has 64G capacity (this is the one the MFD doesn't read).

Can you tel me whats the problem.
Is there a maximum size which the MFD can read?
Find all posts by this user
Quote this message in a reply
07-30-18, 03:32 PM
Post: #10
RE: [CA11] polar download to es78
Francisco,

The maximum capacity for microSD memory cards used with MFDs running LightHouse II software is 32GB. This information, as well as the supported types of file systems may be found within the Memory cards and chart cards section of Chapter 1 - Important Information of the LightHouse II Release 19 Operating Instructions.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)