Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
C120 route import from iMac
09-16-17, 04:54 PM
Post: #1
C120 route import from iMac
Good day

I've searched the forums and the Raymarine site with no luck.
I'm pretty sure of the answer, but wanted confirmation before I give up.

I have an older C120 Classic and I would like to be able to import routes created on my iMac (.gpx files) is there any way to do it?
BTW, I do not have access to a PC nor do I wish to purchase a copy of Windows.

As a last resort, I'll even take the file specs for the .FSH files and build my own conversion utility!

Thanks for any and all help,

Carlos A. Mendoza
S/V Rocinante
Find all posts by this user
Quote this message in a reply
09-18-17, 03:35 PM
Post: #2
RE: C120 route import from iMac
Welcome to the Raymarine Forum Carlos,

The software of Raymarine's A/C/E-Series Classic MFDs and C/E-Series Widescreen MFDs is exclusively designed to support Raymarine's proprietary Archive.fsh file format. As Raymarine's Voyage Planner PC application supports both Archive.fsh file format and GPX file format, this application would typically be recommended for such purposes. There are also some third party applications claiming support for both GPX and Archive.fsh file format (ex. Fugawi Marine 5, GPS Utility, GPSBabel, etc.. As indicated above, Raymarine's Archive.fsh file format is considered proprietary, and as such its specification cannot be provided.
Find all posts by this user
Quote this message in a reply
09-18-17, 07:18 PM
Post: #3
RE: C120 route import from iMac
Thank you
Find all posts by this user
Quote this message in a reply
09-19-17, 07:44 AM
Post: #4
RE: C120 route import from iMac
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)