Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Low voltage warning on Dragonfly "6"
10-22-17, 01:22 PM
Post: #1
Low voltage warning on Dragonfly "6"
Anyone else get the warning for "Low Voltage" when you know your battery, connections and everything else is good. I can't figure this out. I've re-soldered the connections and all tested before use. My battery (7.5 ahr) tests at 13.7v before hooking it up. Two hours later(give or take) I get the warning and in 5 minutes the unit shuts off. I have the latest upgrade and I thought this would help the issue and has not. My battery read 13.2v when I came back. Same with other batteries as well. Any ideas? Thanx, BILL
Find all posts by this user
Quote this message in a reply
10-23-17, 03:55 PM
Post: #2
RE: Low voltage warning on Dragonfly "6"
Welcome to the Raymarine Forum spdmtl,

Given the reported symptom, it is recommended that the display be sent to Raymarine’s Product Repair Center to be bench checked / serviced.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)