Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] DSM300 to eS-Series Display
05-09-18, 02:03 PM (This post was last modified: 05-11-18 10:57 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] DSM300 to eS-Series Display
Hello
I have a DSM300 connects to E120 display, but i've bought a new eS display, could you connect them by Raynet?
Thanks for your help
Find all posts by this user
Quote this message in a reply
05-11-18, 11:03 AM
Post: #2
RE: [CA] DSM300 to eS-Series Display
Welcome to the Raymarine Forum jegrental,

Indeed a DSM300 may be interfaced to an eS-Series MFD via Ethernet communications. When replacing an E-Series MFD with an eS-Series MFD communications between the MFD and the DSM would be accomplished by simply unplugging the SeaTalkhs Cable from the MFD and then connecting an A80160 SeaTalkhs (F) to RayNet (F) Adapter to the SeaTalkhs cable and then connecting the other end of the adapter to either of the eS-Series MFD's Ethernet Network sockets (RayNet (M)).
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)