Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] Axiom 7 interface with rs150 external antenna
07-07-18, 02:55 PM (This post was last modified: 07-08-18 08:45 PM by Tom - Raymarine - Moderator.)
Post: #1
Axiom 7 interface with rs150 external antenna
Where can I find a schematic which details the proper connection of the RS150 and the Axiom 7
Find all posts by this user
Quote this message in a reply
07-08-18, 08:54 PM
Post: #2
RE: Axiom 7 interface with rs150 external antenna
Hello LouS,

There's no specific schematic that shows how these devices connect, as they're both standard NMEA2000 products (SeatalkNG is NMEA2000 with Raymarine's improved colour-coded connectors.) Axiom uses the NMEA2000-standard Devicenet connector rather than SeatalkNG so you'll need a SeatalkNG-Devicenet adaptor cable (parts A06045 or A06075, 400mm or 1m), but other than that the network will need to follow the rules described in the SeatalkNG Reference guide which you can find at https://raymarine.app.box.com/s/2ulwt6ye...1787214721 (Raymarine.com > Support > Manuals and documents > Networking Documents > STNG cables and accessories), also attached here.

If you have no other NMEA2000/STNG devices then a SeatalkNG starter kit, part T70134, will be easiest: that provides a 5-way connector block, two network terminators and a power supply cable.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)