Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Wireless T120 wind transmitter won’t connect
11-10-18, 04:28 PM (This post was last modified: 11-13-18 12:47 PM by Chuck - Raymarine - Moderator.)
Post: #1
[TG11] Wireless T120 wind transmitter won’t connect
After 8 years of reliable service our Wind instrument T120 recently failed. Got it down from mast head replaced battery - still not working.


Have brought a replacement T120 unit but don’t this does not seem to be connecting is the Auto network (add new instrument routine). The T120 is not found the T112 and T111 find each other.

The T120 and instruments (T112 T111) are within a few cm of each other at home not on the boat. I have used both the T111 (digital) and T112 (analogue) to try to connect.

When on the boat the depth, speed, log, compass and NMEA wireless interface are working just fine.

I have reset the instruments (reconfigured) In order to start from scratch?

What am I doing wrong? Set of instructions would be great if I am using the wrong ones.
Find all posts by this user
Quote this message in a reply
11-15-18, 10:55 PM
Post: #2
RE: [TG11] Wireless T120 wind transmitter won’t connect
Hello Duncveal,

At a guess, I'd say that that new T120 has been in someone's stock for a while and its battery is depleted or dead. I'd suggest giving it a few days in bright sunlight (not artificial light, which won't work and can cause damage) and try again, or get the dealer who supplied it to check the battery.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
12-15-18, 06:25 AM
Post: #3
RE: [TG11] Wireless T120 wind transmitter won’t connect
Thanks Tom for advice

I got another T120 that linked first time.

All good now

Duncan
Hello Duncveal,

At a guess, I'd say that that new T120 has been in someone's stock for a while and its battery is depleted or dead. I'd suggest giving it a few days in bright sunlight (not artificial light, which won't work and can cause damage) and try again, or get the dealer who supplied it to check the battery.

Regards,
Tom
[/quote]
Find all posts by this user
Quote this message in a reply
12-16-18, 10:05 PM
Post: #4
RE: [TG11] Wireless T120 wind transmitter won’t connect
That's good to hear, thanks for letting me know.

Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)