Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] do i need to re-register my drone after LH3 software update?
12-30-18, 07:50 AM (This post was last modified: 01-02-19 11:13 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] do i need to re-register my drone after LH3 software update?
Hi,

do i need to re-register my drone after LH3 software update?

I think so, but unsure.

Thanks.

http://www.youtube.com/njfishing1 - from Captain Steve
Find all posts by this user
Quote this message in a reply
01-02-19, 11:47 AM (This post was last modified: 01-02-19 11:47 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] do i need to re-register my drone after LH3 software update?
Welcome back to the Raymarine Forum Ray18,

Indeed, any time that an Axiom/Axiom Pro/Axiom XL MFD's software is updated, a Factory Reset has been commanded, or a System Settings Reset has been commanded, then Mavic drone (if any) must be re-registered.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)