Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Ray91
07-18-19, 01:53 PM (This post was last modified: 07-24-19 10:08 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Ray91
I installed a new Ray 91 on the boat along with a rs150 for the the GPS for the ray91 but I guess i need a different wire to connect them or a different GPS. ?? What part # will I need.

Thanks

Trevor.
Find all posts by this user
Quote this message in a reply
07-24-19, 10:15 AM
Post: #2
RE: [CA11] Ray91
Welcome to the Raymarine Forum Trevor,

While a GA150 Passive GPS antenna may be directly connected to the GPS antenna socket of the Ray91, the Raystar 150 GPS Sensor is designed to be interfaced to a spur socket of a powered and properly terminated SeaTalkng / NMEA 2000 backbone. The Ray91 is likewise designed to be interfaced to a spur socket within such a backbone. Please click here to view a FAQ addressing how a simple backbone may be constructed to interface these products to one another.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)