Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] EVO with an S100/SmartController
08-12-19, 01:58 PM (This post was last modified: 08-19-19 02:08 PM by Chuck - Raymarine - Moderator.)
Post: #1
[TG11] EVO with an S100/SmartController
In the manual for the Ev-1 it lists the S100 and SmartController as compatible but has the note "repeat controller only" after them. What does repeat controller only mean? What functionality will either controller have on a modern Evo autopilot?

Thanks.
Find all posts by this user
Quote this message in a reply
08-16-19, 01:01 AM (This post was last modified: 08-16-19 01:15 AM by Tom - Raymarine - Moderator.)
Post: #2
RE: EVO with an S100/SmartController
Hello Niiiad,

It means that they can't be the sole pilot controller, there must be an p70/p70R or Axiom-class MFD in the system as well, but that's all.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
08-16-19, 08:56 PM (This post was last modified: 08-19-19 02:09 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [TG11] EVO with an S100/SmartController
Would an ES98 MFD work or does it have to be an Axiom?
Find all posts by this user
Quote this message in a reply
08-20-19, 02:15 AM
Post: #4
RE: [TG11] EVO with an S100/SmartController
Sorry, quite right: you can control a recent Raymarine pilot using a display running Lighthouse 2 or Lighthouse 3, including eS MFDs, without a dedicated fixed-mount pilot controller (so just an eS and Smartcontroller will be ok.) I personally always recommend a dedicated pilot display, but it's not required with those MFDs.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)