[CA] [CA11] E120 displaying GPS, but not depth or AIS

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Dan,

E-Series Classic MFDs featured limited support for NMEA 2000 integration, and this was primarily targeted to support interfacing NMEA 2000 engine systems to the MFD. The greatest level of such support will take place in E-Series Classic MFDs which have been updated with the final E-Series Classic MFD software update (v5.69). It is also recommended that the ST-STng Converter's software level be verified to be at v2.03 and if not that these products be updated accordingly. That said, the software of E-Series Classic MFDs never supported processing NMEA 2000 PGNs featuring AIS data. It operating with v5.69 software, the same would appear so for NMEA 2000 PGNs featuring depth data, at least within the versions of software presently installed. Should the equipment have been updated with the specified software and should the problem persist, then you may want to consider disconnecting the E-Series Classic MFD from the STng / NMEA 2000 backbone and instead interface it to the SeaTalk bus to which the ST60 instruments have been interfaced.