The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] M232 - RTSP video out
12-06-19, 12:56 PM (This post was last modified: 12-09-19 04:06 AM by Louise - Raymarine - Moderator.)
Post: #1
[LW11] M232 - RTSP video out
Hello,

I have a FLIR M232 (Nexus Server v2.5.30.26 S, web. Conf. Version 3.17.0.41*, Software Version: 2.05-16).
I am now trying for days to get a RTSP stream out of the camera (played on VLC player installed on a PC connected on the same LAN as the M232), but without success.
I believe my RTP settings are correct (see attached screenshots), but VLC can’t open the stream rtsp://my_M232_IP-Add:554/test ! ☹

The same menu/setting exists on the FLIR FC-Series cameras, and the documentation provides information about the RTP settings.
But unfortunately the user manual for the M232 does not provide any information about the settings for the menu maintenance>Sensor>Modules>Video.

My first question is therefore, is the M232 able to stream out a RTSP video on the ethernet network?
The specifications (https://www.flir.com/support/products/m2...ifications) says: “H264 IP Video stream”, and in few other places it says that the M232 is supposed to be able to stream out the video.

Thanks,
Sebastien
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[LW11] M232 - RTSP video out - Sebastien - 12-06-19 12:56 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)