Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Feedback request on proposed SeaTalkNg on Regal 3560
01-05-20, 05:58 PM (This post was last modified: 01-05-20 09:10 PM by Chuck - Raymarine - Moderator.)
Post: #4
RE: [CA11] Feedback request on proposed SeaTalkNg on Regal 3560
Chuck, so after doing part of the install this weekend, I realized I neglected to account for the GPS signal to my Ray215 VHF radio (was coming from old raystar connected to C80 NMEA port). If I'm reading relevant FAQ correctly, If I just introduce the SeaTalkNG to NMEA 0183 converter (E70196) and connect to VHF NEMA input wires as shown in attached updated diagram, that should do the trick? I'm assuming there is no way to daisy-chain from the ST60 (which is already connected to the existing SeaTalk 1 converter) to the VHF?

Thanks again,

John


Attached File(s)
.pdf  SeaTalkNg_Regal_3560_v2.pdf (Size: 808.32 KB / Downloads: 237)
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread

Forum Jump:


User(s) browsing this thread: 1 Guest(s)