Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] Connecting to an i70

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Connecting to an i70
12-19-19, 04:22 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Connecting to an i70
Welcome to the Raymarine Forum Sailor112,

While it would technically possible daisy chain the AIS700 to the i70 if the total length of spur cable used within the resulting daisy chain was less than 6m, if installing per NMEA 2000 standards, then each product should be interfaced as an individual spur to the system's powered and properly terminated SeaTalkng / NMEA 2000 backbone. Accordingly, it would be considered to be a best installation practice to add a spur socket to the backbone to accommodate the AIS700.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Connecting to an i70 - Sailor112 - 12-19-19, 01:55 PM
RE: [CA11] Connecting to an i70 - Chuck - Raymarine - Moderator - 12-19-19 04:22 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication