Threaded Mode | Linear Mode

Hank496

Vessel 2009 Sabre 38 Hardtop Express

Existing Inventory

Electronics Inventory
MFG PART# Model Comments
Display
Raymarine E62223-US E210W -M(STBD) 0513016 STNG & STHS & NMEA0183 (ICOM VHF S)
Raymarine E62223-US E210W -S(PORT) 0513017 STNG & STHS & NMEA0183 (ICOM VHF P)
Port STNG not used while Mstr unit on

AIS
Raymarine E32158 AIS650 Dedicated GPS & VHF Ant.
STNG Connection
Radar
Raymarine E52069E 4 Kw HD Open Array
E52083 SeaTalkHS Connection to STHS Switch

GPS
Raymarine E22158 Raystar 125 Attached to SeaTalkNG converter

Depth Raymarine E63074 DSM30 STHS
Airmar ??? bronze dual frequency transducer

AutoPilot
Raymarine E12098-P ST6002 ST1,NMEA0183
Raymarine E12177 IPS S3G
Raymarine Volvo DPU ST1,ST2,NMEA0183, NMEA2000
Volvo 3819744 IPS Interface Below Port HCU

NMEA2000 Interface
Volvo 3889757 (1) Below Starboard HCU
port/stbd engines linked
through HCUs

Engines
Volvo D6-330 B-D 200602147 EVC-C1/C2 commissioned 10/25/2011
Volvo D6-330 B-D 200602148 EVC-C1/C2 commissioned 10/25/2011

Drives
Volvo IPS-450 3194004713 IPS-1
Volvo IPS-450 3194004714 IPS-1

Engine management

Volvo 4" EVC Tach System Tach
Volvo 4" EVC Tach System Tach
Garmin GPSMap 7608 dedicated engine display

The plan is to upgrade E120W displays to twin Axiom Pro 12

I am now down to some basic questions:

1. The Volvo engine NMEA2000 gateway is Volvo part 3389757, does this have to be upgraded with a new gateway?

2. The twin Icom VHFs are set up with P & S VHF connected to P & S E120W via NMEA0183/power cord for DSC functionality. They are not connected via multiplexer (familiar with MUX installation with previous boat so I know it is not there). Can this concept be continued with twin Axiom Pro?

3. Can the E120w Power cords with NMEA0183 connections be used with the new Axiom Pro 12?

4. The use of the ST6002/ S3G autopilot with the Axiom display seems kind of clunky. Am I correct that AP control when following a Route will have to be done entirely through the ST6002 control head? I currently prefer to use one of the 120 displays to track progress can control active/standby function. We are in New England and course deviation for lobster pot buoys can be frequent.

5. If the axiom display can not be used with the existing AP, the plan would be to upgrade to the T70214 EV-2 package (although prefer p70Rs to 70r). When reviewing documentation on this package it calls for a IPS gateway, but no part number is provided.
a) is this the same as the Volvo 3819744 currently being used with the S3G?
b) if a new part is this Volvo, or Raymarine? Part number?

6. Can the DSM 30 and existing transducer continue to be used?

7. The RS 125 needs a battery replacement, but once that is done can the 125 continue in service?

8. Can the AIS 650 continue to be used?
a) is there a battery in the AIS 650 GPS and does it need to be serviced?

Thank you for your help.

Hank