[CA] [CA11] Does MARPA need autopilot or electric compass to function
|
02-05-20, 03:27 PM
(This post was last modified: 02-05-20 03:40 PM by Chuck - Raymarine - Moderator.)
Post: #6
|
|||
|
|||
RE: [CA11] Does MARPA need autopilot or electric compass to function
Mika,
Examples of products which are capable of producing 10Hz heading include, but are not limited to the following: - Raymarine AR200 Augmented Reality Sensor (ay be calibrated via a MFD running the latest LightHouse 3 software) - Evolution autopilot EV-1 or EV-2 CCU (may be calibrated via a MFD running the latest LightHouse 3 software or LightHouse II v19.03 software) - Raymarine legacy SPX autopilot, S2G, S3G, etc. - Autocomp 1000 (NMEA 0183) ... may be bridged to SeaTalkng / NMEA 2000 via a NMEA 0183 to NMEA 2000 data bridging device (ex. Actisense NGW-1-STNG, etc.) - third party satellite compass |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] Does MARPA need autopilot or electric compass to function - Mika - 02-02-20, 11:33 AM
RE: [CA11] Does MARPA need autopilot or electric compass to function - Chuck - Raymarine - Moderator - 02-03-20, 02:36 PM
RE: [CA11] Does MARPA need autopilot or electric compass to function - Mika - 02-05-20, 11:00 AM
RE: [CA11] Does MARPA need autopilot or electric compass to function - Chuck - Raymarine - Moderator - 02-05-20, 02:50 PM
RE: [CA11] Does MARPA need autopilot or electric compass to function - Mika - 02-05-20, 03:11 PM
RE: [CA11] Does MARPA need autopilot or electric compass to function - Chuck - Raymarine - Moderator - 02-05-20 03:27 PM
|
User(s) browsing this thread: 1 Guest(s)