The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Fishfinders v / [CA] [CA11] Closing the Gap with 1kw medium wide transducer?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Closing the Gap with 1kw medium wide transducer?
02-14-20, 04:49 AM (This post was last modified: 02-14-20 10:04 AM by Chuck - Raymarine - Moderator.)
Post: #1
Fish On Offline
Member
***
 		Posts: 108
Joined: May 2016
Reputation: 0
[CA11] Closing the Gap with 1kw medium wide transducer?
1st Question;
Have Dual Axiom Pro's/CP570 with a 45' diesel inboard's. Already have your 2kw R109LH chirp transducer which I'm completely satisfied, and the RV212 dual transducer set-up, but just wanted to close the gap with a 1 kw thru hull Medium wide chirp transducer. Not sure what do have, or if something exists. Mainly for pelagics.

2nd Question;
The CP570, can that handle two, 2kw transducers? Little confused as it says it can handle 2 seperate transducers with two seperate ports.
Or, can I run one 2kw transducer, and one, 1kw transducer. Or it just does one transducer Up to 3kw.
Thanks!
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Closing the Gap with 1kw medium wide transducer? - Fish On - 02-14-20 04:49 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication